Saeshin X-Cube Implant Engine Physiodispenser - For clinical use

The Sashine X CUBE Physiodispenser is a small, lightweight and portable motor. It can be used in all type of dental implant & drill bits. 

Compatibility of Saeshin X Cube Implant Motor with all type of dental implant & drill a bit, makes it versatile and easy to use. Its compact design makes dental procedures simple and effective, improving the experience for both the doctor and the patient.

Key Features of Saeshin X CUBE I Physiodispenser

3 Memory Program:

The Saeshin X Cube Physiodispenser lets dentists save three different settings for speed, torque, and pump. This helps them quickly switch between procedures or steps in the implant process without having to adjust the settings each time.

Auto-Off Function:

The Saeshin X Cube implant motor goes into auto-off mode after some time without being used, which preserves battery life and makes it safer by preventing unintentional use of the device.

Forward and Reverse Rotation: 

The Saeshin physiodispenser can rotate in both directions; that is, forward (FWD) or backward (REV). To drill holes into something or put an implant into someone, one may require the forward direction; however, if someone wants to take apart some pieces of machinery, then they would use the reverse motion instead.

Adjustable Irrigation Pump (3 levels):

The irrigation pump in the Saeshin X Cube implant engine has three levels, which control the amount of cooling fluid throughout operations. The flow rate will be adjusted depending on how much is necessary for each procedure, thus avoiding excessive heating and tissue injury.

Memory Setting:

It is similar to the Memory Program but is meant for saving preferred settings by dentists; including parameters or temporary storage during a process.

RPM: 30~2000 rpm (20:1):

The Saeshin X Cube motor allows rotation between 30 and 2000 revolutions per minute (rpm). The “(20:1)” indicates a gear reduction ratio that results in the motor speed being decreased by a factor of twenty.

Torque: 5~55 N.cm (20:1):

In this physiodispenser, it is possible to indicate the torque values which are extended from 5 to 55 Newton centimeters (N.cm). The (20:1) gear reduction ratio impacts on final torque output at drill a bit level.

Key Specifications of Saeshin X-Cube Implant Engine Physiodispenser

Points that you will love about Saeshin X CUBE I Physiodispenser

• The X Cube Physiodispenser is small and lightweight, making it easy to carry and handle.
• The Saeshin X Cube works with all types of dental implants, including titanium and zirconia, and is compatible with any drill bit.
• The X Cube implant motor is designed for simplicity and ease of use, reducing setup time and effort.
• This Saeshin physiodispenser ensures efficient dental procedures, enhancing the workflow for dentists.
• The Saeshin X Cube implant engine provides a smoother, more comfortable experience for patients during dental implants.

List of supplies with Saeshin X CUBE I Physiodispenser:

• 1 x Controller (Implant Engine)
• 1 x Contra angle handpiece
• 1 x E-type motor
• 1 x Hanger
• 1 x Irrigation tube
• 1 x Motor cap for autoclave
• 1 x Tube holder
• 1 x Tube clamp
• 1 x Motor stand
• 1 x Power cord
• Instruction manual

Quick tips of Saeshin X CUBE I Physiodispenser

• Follow User Manual Instructions:  
• Learn how to set up and use the X Cube Physiodispenser.
• Keep the Saeshin X Cube clean to make sure it works well.
• Use drill bits that fit the X Cube implant motor.
• Adjust the fluid flow to avoid overheating during use.
• Follow safety rules to protect patients and staff.

Warranty Info:

The Saeshin X Cube Physiodispenser comes with a 1-year warranty, effective from the date of purchase. At Hospitalstore, we sell original, brand-new products that are eligible for all warranty claims.

NOTE: Conditions that are not included in the warranty:

• Assembly operation, extensions, re-adjustments are carried out by the importer.
• Application of the products or repaired by anyone other than the authorized manufacturer representative.
• This warranty shall not extend to any instrument that has been damaged, subjected to misuse, or accident.
• This warranty shall not extend to any instrument from which the manufacturer’s original serial number tag or product identification marking have been altered or removed.

Directions for Use Saeshin X CUBE I Physiodispenser:

• Follow User Manual Instructions: 
• Unpack the X Cube Physiodispenser and connect it to the power supply.
• Select a compatible drill bit for the procedure.
• Set the desired speed and torque on the Saeshin X Cube.
• Ensure the area is clean and ready for the dental implant.
• Turn on the X Cube implant motor and begin the procedure.
• After completing the procedure, turn off the Saeshin physiodispenser and clean the equipment.

Frequently Asked Questions about Saeshin X CUBE I Physiodispenser

Q1: What does the Physiodispenser Saeshin X CUBE I stand for?

The Saeshin X CUBE I Physiodispenser is a small-sized inbuilt motor which can also be moved around; it has been invented to improve efficiency when carrying out dental procedures involving placement of dental implants.

Q2: Which varieties of dental implants can be used alongside the X Cube Physiodispenser?

The X Cube Physiodispenser accommodates any type of dental implant, including those made up of titanium or zirconium oxide.

Q3: What maintenance would you recommend for the Saeshin X Cube?

 The only way to ensure proper functioning of the Saeshin physiodispenser is to routinely clean it and inspect if there are any loose parts.

 Q4: Can you use any type of drill a bit in the X Cube implant motor?

Yes, it does have a varied stock of drill bits, making it very versatile.

Q5: How long does Saeshin guarantee their X Cube implant engine?

Usually confronted with manufacturing faults, a year-long guarantee can be found in most Saeshin X Cube implant engines.